Fit the new Aluminium/Chrome door pin and tighten the grub screw with the tool provided.
Note : If the pin will not seat properly on the rod linkage, then use a small drill bit to clear out the debris from inside the new pin then re-fit..
How2Fit ~ irmscher Door Pins
|
Prise out the red insert from the original door pin. |
|
The door pin will then just slide freely off the rod linkage. |
|
Fit the new Aluminium/Chrome door pin and tighten the grub screw with the tool provided. Note : If the pin will not seat properly on the rod linkage, then use a small drill bit to clear out the debris from inside the new pin then re-fit.. |
All irmscher-BiTs 'How2Fit' Guides are public domain, and may be copied freely to any non-commercial websites or sales purposes as long as the photos are not edited in any way.
We can take no responsibility for damage or loss by following these guides, and are used at your own risk.
We would like more fitting guides for other irmscher accessories that we sell. If you wish to submit a few photos with brief instructions we will publish it for you similar to the format above. Although most items come with fitting instructions, this will help others understand the procedures involved before purchasing.
Copyright www.irmscher-BiTs.com 2003-04